The MSD Programmable Digital-7 Ignition Control is far and above the most advanced control available! With MSD's race winning experience and performance ignition knowledge, the Programmable Digital-7 is THE ignition control.
No Timing Compromises Ignition timing is always a compromise between cylinders. The dynamics of the flow of air and fuel into each cylinder is never exactly the same no matter how much machining magic has been done. This has always caused top engine builders to compromise their ignition timing. With the Programmable Digital-7's advanced Individual Cylinder Managment system and other exact timing programs you will never need to compromise again.
ICM Timing Control: Adjust the ignition timing in each cylinder! Program up to 5° of timing retard into each individual cyclinder in 0.1° increments.
Run Curve: Plot a timing curve in 0.1° per 100 rpm throughout the entire rpm range of your engine!
Launch Curve: Program a timing curve exclusively for the launch! If the starting line conditions are less than adequate, you can set a completely different curve for the launch!
Launch Retard: Retard the timing up to 15° for 0-2.5 seconds after you launch the car.
Step Retards: Three steps of retard that can be activated with nitrous solenoids or switches.
Gear Retards: Program a timing retard up to 5° with every gear change!
Start Retard: Ease engine cranking with an adjustable retard during start up.
Traction Control Detection: The TCD monitors the magnetic pick-up input signal and if it senses that the signal has been modified, it will set a trouble code (4,000 RPM limit) and flash indicating that traction control has been detected.
Power No other ignition system comes close to matching the output power and the Individual Cylinder Managment timing system of the Programmable Ignition. To effectively handle all of the ignition's tasks, a 15mHz microcontroller, reviews, manages and analyzes every trigger signal up to 15,000,000 instructions per second! Capacitive discharge circuits combined with an IGBT Coil driver deliver incredible cylinder pressures. Below 3,300 there is of course MSD's powerful series of mulitple sparks. This spark series burns in the cylinder of over 20° of crankshaft rotation resulting in improved combustion for a smooth idle, great throttle response and increased power.
RPM Controls Monitoring the engine's rpm allows you to set shift light points, activation points and rev limits. The Programmable Digital-7 has MSD proven Soft Touch rev limiting controls built in and lets you program several rpm features.
Three Step Rev Control: Program three rev limits in 100 rpm increments for burnout, launch and overrev protection.
Shift Light: Program a different rpm setting for each gear change for up to six gears.
RPM Activated Window Switch: Activate a circuit at an adjustable rpm such as a nitrous solenoid, then set another rpm level to deactivate the same circuit.
Easy Programming Don't let all of these accessories and adjustments worry you. MSD engineers developed two very useful and easy ways for you to program the ignition. You can use the hand held programmer (MSD-7550) or MSD's Pro-Data+ Software package on your PC. The Programmable Digital-7 Ignition Control can be triggered with a points/ECU trigger, magnetic pickup in a distributor or a non-magnetic pickup of a crank trigger. There is even a mag pickup compensation adjustment for absolute trigger accuracy! The single unit is fully potted for vibration protection and is easy to mount. It can be used on 4, 6 or 8-cylinder engines and is supplied with the Pro-Data+ software, PC harness, vibration mounts, wiring and thorough instructions.
**********Shipping is FREE**********
FREE SHIPPING and NO HANDLING CHARGES ON MSD ORDERS ONLY OVER $500.00
PLEASE CALL VHR MOTORSPORTS DRAG RACING PARTS & ACCESSORIES SALES DEPARTMENT AT (614) 679-5682 IF YOU HAVE ANY QUESTIONS ABOUT THIS ITEM. Or if you want VHR to add an Item to our store for you to purchase. Thank You VHR Motorsports Drag Racing Parts & Accessories
PLEASE CANTACT US FOR ALL OF YOUR RACE CAR PARTS
VHR Motorsports Drag Racing Parts & Accessories is a Dealer for MANY OTHER BIG NAME PRODUCTS and this item is BRAND NEW
VHR Motorsports Drag Racing Parts & Accessories has a HUGE PRODUCT LINE SO IF YOU NEED A PART AND DON'T SEE IT IN OUR STORE PLEASE LET US KNOW AT (614) 679-5682 or Email us at [email protected] and we can add it to our storefor you to purchase.
PLEASE VISIT OUR EBAY STORE FOR MORE PARTS AND ACCESSORIES
Buyer pays UPS,DHL,FED EX, or USPS shipping & handling charges for ground to the continuous 48 states. Alaska and Hawaii shipping will be higher -Please e-mail [email protected] for a rate quote to your door. Please specify which service your prefer?
International shipments: VHR Motorsports will ship USPS or UPS, FED EX, DHL and ONCE VHR HAS A COPY OF THE RECEIPT (WE ARE NO LONGER RESPONSIBLE FOR THE SHIPMENT and NO REFUNDS FOR LOST SHIPMENTS)
Credit Cards: Visa, MasterCard, American Express or Discover Cards Accepted Directly over the phone. Paypal Payments to our email address.
Pay Pal: Pay Pal payments to [email protected] All Pay Pal payments accepted will be shipped to the confirmed Pay Pal address only. Unconfirmed Pay Pal payments will not be accepted.
Money Orders/Cashier's Checks: Money orders or Cashiers checks are always accepted. Please add your auction number to the payment and send to:
Payment Terms: Auctions must be paid for within 7 days of the auction end or a Non Paying Bidder Alert will be filed with eBay.
Return Policy If the customer wishes to return or upgrade the product or products within thirty (30) days from the date of receipt, a re-stocking fee of 20% will be assessed on the trade-in equipment, and the balance will be applied towards any equipment inventoried by VHR Motorsports. All original boxes, packaging, warranties, and instruction manuals must accompany the equipment, and it must appear in "NEW" condition, as determined by VHR Motorsports. Crankshafts are non-Returnable/non-Refundable unless defective. Shipping and Handling fees are not refundable.
Warranties/Guarantees All product guarantees and warranties are provided by both VHR Motorsports and the manufacturers. This can also be verified by contacting either the manufacturers themselves or by contacting VHR Motorsports.
Limited Warranty Merchandise is warranted against defects of material or workmanship. Any alterations, improper installation or improper use of products will void all warranty. Any crankshaft that has been balanced is not returnable. Inspect your order upon receipt and immediately contact VHR Motorsports if there are errors or defective parts. Any shipping/invoicing errors made must be corrected within 5 days after receiving the merchandise, if not, the merchandise is yours to keep. MAKE SURE YOU CHECK YOUR PARTS to ensure that what you received is what you ordered before altering or installing (misboxed items apply). Once the part has been altered or installed, all warranties against defects of material or workmanship are void and the parts are not returnable. All merchandise warranties are limited to replacing or repairing of the parts only. VHR Motorsports and the manufacturers will inspect all parts to determine if it is defective. Claims for damage, labor or towing will not be allowed.